DFS01 is an ideal support system for a range of porcelain, ceramic, technical stone and structurally backed natural stone panels with a thickness up to 20mm where an arrangement of longer rather than higher panels is preferred. This is achieved by the use of a continuous horizontal rail, which provides an enhanced rigidity of the facades in the horizontal direction. The system is suitable for both standard grid and random pattern facades.

DFS02 is an ideal support system for a wide range of porcelain, ceramic, technical stone and structurally backed natural stone panels with a thickness up to 20mm where a very low cladding zone is required; this is achieved by the use of only horizontal rails as the supporting element. The ease of the installation constitutes the main benefit of an arrangement that does not feature either structural support brackets or vertical rails, thus making it the perfect option for enclosed areas or where a minimal wind-load effect is present. This system is suitable for both standard grid and random pattern facades.

DFS03 is a highly versatile system that is mostly used to support a wide range of porcelain, ceramic, technical stone and structurally backed natural stone panels with a thickness up to 20mm where a continuous vertical joint along the facade is required. The possibility of varying the cladding zone by only rotating the ?cornarc? brackets at their pivot point and without having to replace any elements is the main benefit of the system, which is suitable for standard grid and broken bonded facades.

DFS04 is a heavy duty support system for a wide diversity of natural and technical stone panels with thicknesses ranging from 20 to 40 mm where an arrangement of longer rather than higher panels is preferred. This is achieved by the use of a continuous horizontal rail, which provides an enhanced rigidity of the facade in the horizontal direction. Specially designed plates at the both sides of the adjustable consul brackets significantly prevent any trans-lateral movement, which is suitable for both standard grid and random pattern facades.

DFS05 is an extremely versatile support system for a wide range of technical and natural stone panels with a thickness between 20 and 50 mm where an arrangement of longer rather than higher panels, featuring a continuous horizontal joint, is required. Features such as the kerfing concept, along with ?U? brackets, square-section vertical rails and continuous horizontal rails constitute the main benefits of this system, which is suitable for both standard grid and random pattern facades.

DFS06 is an exceptionally robust support system for a wide range of technical and natural stone panels with a thickness between 20 and 50 mm where an arrangement of longer rather than higher panels featuring a continuous horizontal joint is required. A unique sleeve design aimed to absorb contractions and expansions of the arrangement, along with a rectangular-shape horizontal rail constitute the main benefits of this system, which is suitable for both standard grid and random pattern facades.

DFS07 is a very simplistic, yet effective support system for a wide range of technical and natural stone panels with a thickness between 20 and 50 mm where a relatively low cladding zone and a continuous vertical joint along the facades is required. Non-visible support anchors coupled with an uncomplicated adjustment sleeve design are the main benefits of the system, which is suitable for both standard grid and broken bonded facades.

DFS08 is an innovative support system for a wide range of porcelain, ceramic, technical stone and structurally backed natural stone panels with a thickness up to 15mm where a relatively low cladding zone and a concealed mechanical fix is required. Non-visible support anchors and the absence of arduous-to-install adjustment sleeves between panels and anchors are the main benefits of the system, which is suitable for both standard grid and broken bonded facades.

DFS09 is a straightforward, yet very functional support system for a wide range of technical and natural stone panels with a thickness between 20 and 50mm where a relatively low cladding zone is required. The possibility of positioning the pins in either the vertical or horizontal direction to respectively achieve a continuous horizontal or vertical joint is the main benefit of the system, which is suitable for standard grid, broken bonded and random pattern facades.

DFS10 is a state-of-the-art pin system that is mostly used to support natural stone panels with a thickness between 30 and 50mm where an arrangement of longer rather than higher panels is preferred; this is achieved by the use of a continuous horizontal rail, which provides an enhanced rigidity of the facade in the horizontal direction. The possibility of varying the cladding zone by only rotating the ?conarc? brackets at their pivot point and without having to replace any elements is the main benefit of the system. This is suitable for standard and random grid pattern.

DFS11 is an extremely simple, yet effective support system for a wide range of porcelain, ceramic, technical stone and structurally backed natural stone panels with a thickness up to 15mm where a relatively low cladding zone and a quick-to-install fixing solution is required. The major benefit is that no fasteners are used to connect the dead-load clips to the vertical rails, whilst no groove or perforation of any kind is needed on the facade panels. The system is suitable for both standard grid and broken facades.

DFS12 is an ideal support system for a wide range of porcelain, ceramic, technical stone and structurally backed natural stone panels with a thickness up to 20mm where a relatively low cladding zone and a conventional mechanical fix is required. A clear advantage is that no groove, drilling or perforation of any king is needed on the facade panels. The system is suitable for both standard grid and broken bonded facades.

DFS13 is an ideal bonded support system for a wide range of porcelain, ceramic, technical stone and structurally backed natural stone panels with a thickness up to 20mm where a relatively low cladding zone is required. This is achieved due to the fact that there is no horizontal rail acting between the vertical rail and the back of the panel. The system is suitable for both standard grid and broken bonded facades.

DFS14 is an extraordinarily robust option for a wide range of porcelain, ceramic, technical stone and structurally backed natural stone panels with a thickness up to 20mm where a very low cladding zone and a continuous horizontal joint is required; this is achieved by the use of only horizontal rails as the support element. The ease of the installation constitutes the main benefit of an arrangement that does not feature either structural support brackets or vertical rails, making it thus ideal for enclosed areas or where a minimal wind-load effect is present. The system is suitable for both standard grid and random pattern facades.

DFS15 is a stylish, high-tech support system for a wide range of metallic and terracotta louvers with lengths up to 1200mm. The main benefit of the 2-piece horizontal rail lengths is that, by altering the adjustment between its components, it also allows variation of the louvres? tilting angle as desired and at any time.